To Next Page

To Previous Page

B-15

Monitoring and Analyzing Switch Operation

Status and Counters Data

Port-Level MAC Address Viewing and Searching. This feature displays

and searches for MAC addresses on the specified port instead of for all ports

on the switch.

1. From the Main Menu, select:

1. Status and Counters

7. Port Address Table

Figure B-10. Listing MAC Addresses for a Specific Port

2. Use the Space bar to select the port you want to list or search for MAC

addresses, then press

[Enter] to list the MAC addresses detected on that

port.

Determining Whether a Specific Device Is Connected to the Selected

Port. Proceeding from step 2, above:

1. Press

[S] (for Search), to display the following prompt:

Enter MAC address: _

2. Type the MAC address you want to locate and press

[Enter]. The address

is highlighted if found. If the switch does not find the address, it leaves

the MAC address listing empty.

3. Press

[P] (for Prev page) to return to the previous per-port listing.

Prompt for Selecting

the Port To Search

Other manuals for HP ProCurve 2510-24

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510-24 and is the answer not in the manual?

General