HP PROCURVE 6120 User Manual

6-16
Switch Memory and Configuration
Using Primary and Secondary Flash Image Options
switch from the opposite flash image and using show version again, you can
determine the version(s) of switch software in both flash sources. For exam-
ple:
Figure 6-9. Determining the Software Version in Primary and Secondary Flash
Switch Software Downloads
The following table shows the switch’s options for downloading a software
version to flash and booting the switch from flash
Table 6-1. Primary/Secondary Memory Access
The different software download options involve different copy commands,
plus xmodem, usb, and tftp. These topics are covered in Appendix A, “File
Transfers”.
ProCurve(config)# show version
Image stamp: /sw/code/build/vern(t4br)
Jul 27 2009 13:42:40
Z.14.04
1037
Boot Image: Primary
ProCurve(config)# boot system flash secondary
Device will be rebooted, do you want to continue [y/n]? y
ProCurve(config)# show version
Image stamp: /sw/code/build/vern(t4br)
Jul 27 2009 13:42:40
Z.14.04
1037
Boot Image: Secondary
1. In this example show
version indicates the
switch has version Z.14.04
in primary flash.
2. After the boot system
command, show version
indicates that version
Z.14.04 is in secondary
flash.
Action Menu CLI Web
Browser
SNMP
Download to Primary Yes Yes Yes Yes
Download to Secondary No Yes Yes
a
a.This download simply reloads the image.
Yes
Boot from Primary Yes Yes Yes Yes
Boot from Secondary No Yes No Yes

HP PROCURVE 6120 Specifications

General

Brand	HP
Model	PROCURVE 6120
Category	Switch
Language	English