HP PROCURVE 6120 User Manual

13-14
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
SNMP Community Features
Use SNMP communities to restrict access to the switch by SNMP management
stations by adding, editing, or deleting SNMP communities. You can configure
up to five SNMP communities, each with either an operator-level or a manager-
level view, and either restricted or unrestricted write access.
Using SNMP requires that the switch have an IP address and subnet mask
compatible with your network.
Caution For ProCurve Manager (PCM) version 1.5 or earlier (or any TopTools version),
deleting the “public” community disables some network management
functions (such as traffic monitoring, SNMP trap generation, and threshold
setting). If network management security is a concern, and you are using the
above software versions, ProCurve recommends that you change the write
access for the “public” community to “Restricted”.
Menu: Viewing and Configuring non-SNMP version 3
Communities
To View, Edit, or Add SNMP Communities:
1. From the Main Menu, Select:
2. Switch Configuration...
6. SNMP Community Names
Feature Default Menu CLI Web
show SNMP communities n/a page
13-14
page
13-16
—
configure identity information none — page
13-17
configure community names
MIB view for a community name
(operator, manager)
write access for default
community name
public
manager
unrestricted
page
13-14
“
“
“
page
13-17
“
“
“
“
—

HP PROCURVE 6120 Specifications

General

Brand	HP
Model	PROCURVE 6120
Category	Switch
Language	English