EasyManuals Logo

HP PROCURVE 6120 User Manual

HP PROCURVE 6120
589 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #571 background imageLoading...
Page #571 background image
G-17
Network Out-of-Band Management (OOBM)
Tasks
Switch 41# config
Switch 41(config)# vlan 1
Switch 41(vlan-1)# ip address 10.1.129.7/20 Set up IP address on data network.
Switch 41(vlan-1)# end Exit back to manager context.
Switch 41# show oobm Look at default OOBM configuration.
Global Configuration
OOBM Enabled : Yes
OOBM Port Type : 10/100TX
OOBM Interface Status : Up Defaults look appropriate.
OOBM Port : Enabled
OOBM Port Speed : Auto
Switch 41# config
Switch 41(config)# oobm Go to OOBM context and
Switch 41(oobm)# ip address 10.255.255.41/24 add IP address and
Switch 41(oobm)# ip default-gateway 10.255.255.1 default gateway.
Switch 41(oobm)# end Exit back to manager context.
Switch 41# ping 10.1.131.43 Ping server in this rack (on data network).
10.1.131.44 is alive, time = 19 ms
Switch 41# ping 10.1.131.51 Ping server in adjacent rack.
10.1.131.51 is alive, time = 15 ms
Switch 41# ping 10.255.255.42 Ping switch in adjacent rack.
The destination address is unreachable. Oops! It’s on the management network.
Switch 41# ping source oobm 10.255.255.42 Go through the management port
10.255.255.42 is alive, time = 2 ms and it works fine.
Switch 41#

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP PROCURVE 6120 and is the answer not in the manual?

HP PROCURVE 6120 Specifications

General IconGeneral
BrandHP
ModelPROCURVE 6120
CategorySwitch
LanguageEnglish

Related product manuals