EasyManua.ls Logo

HP PROCURVE 6120

HP PROCURVE 6120
589 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index – 15
task monitor …B-8
taskusage -d …B-8
taskUsageShow …B-8
Telnet
connecting to switch 3-4
enable/disable 7-4
outbound 7-6
terminate session, kill command 7-11
troubleshooting access C-8
telnet
domain name address 7-6
hostname 7-6
ipv6 address 7-6
show command 7-6
switch-num 7-6
terminal access, lose connectivity …7-9
terminal type …7-3
terminate remote session …7-11
TFTP
auto-TFTP A-11
auto-TFTP feature A-11
auto-TFTP, disable A-11, A-14
copy command output A-31
copy crash data A-32
copy crash log A-33
copy event log output A-31
copying a configuration file A-27
copying software image A-25
disable A-14
disabled A-11
download software using CLI A-7
downloading software using console A-5
enable client or server A-9
enabling client functionality A-9
enabling server functionality A-9
switch-to-switch transfer A-22
troubleshooting download failures A-6
using to download switch software A-4
threshold setting 13-6, 13-14
thresholds, SNMP 13-20
time format, events …C-25
time protocol
selecting 9-3
time server …8-2
time zone 7-13, 7-18
time, configure …7-18
TimeP 8-3, 8-5
assignment methods 9-2
disabling 9-23
enabling and disabling 9-20
manual config priority 8-12
poll interval 9-23
selecting 9-3
server address listing 9-9, 9-20
show management 9-20
viewing and configuring, menu 9-17
viewing, CLI 9-19
timesync, disabling …9-23
Time-To-Live 8-3, 8-5, 8-6, 8-10
See also TTL.
time-to-live, LLDP …13-40
Time-To-Live, on primary VLAN …8-4
TLV 13-39
TLVs, mandatory 13-76
traceroute C-79, C-81, C-84
asterisk C-63
blocked route C-64
fails C-63
traffic mirroring
See mirroring.
traffic monitoring 13-6, 13-14
See also mirroring.
traffic, port …B-11
transceiver
error messages 10-15
view status 10-14
transceiver, fiber-optic 10-5
transceivers
configuring when not inserted 10-29
not inserted 10-29
trap …5-25
authentication trap 13-28
CLI access 13-20
configuring trap
receivers 13-20
security levels 13-21
trap notification 13-50
trap receiver 13-5, 13-6
configuring 13-20
sending event log messages 13-21
sending SNMPv2 informs 13-21
SNMP 13-20
up to ten supported 13-20
traps
enabling network security notifications 13-27
link-change 13-29
troubleshooting

Table of Contents

Related product manuals