EasyManua.ls Logo

HP ProCurve 6120G/XG

HP ProCurve 6120G/XG
606 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web and MAC Authentication
Configuring Web Authentication
ProCurve Switch (config)# no aaa port-access web-based 47 ewa-server 10.0.12.181
ProCurve Switch (config)#
Figure 3-7. Removing a Web Server with the aaa port-access web-based ews-server Command
Syntax:
aaa port-access web-based <port-list >
[logoff-period] <60-9999999>]
Specifies the period, in seconds, that the switch
enforces for an implicit logoff. This parameter is
equivalent to the MAC age interval in a traditional
switch sense. If the switch does not see activity after a
logoff-period interval, the client is returned to its pre-
authentication state. (Default: 300 seconds)
Syntax: aaa port-access web-based <port-list > [max-requests <1-10>]
Specifies the number of authentication attempts that
must time-out before authentication fails.
(Default: 2)
Syntax: aaa port-access web-based <port-list> [max-retries <1-10>]
Specifies the number of the number of times a client
can enter their user name and password before authen-
tication fails. This allows the reentry of the user name
and password if necessary.
(Default: 3)
Syntax: aaa port-access web-based <port-list> [quiet-period <1 - 65535>]
Specifies the time period (in seconds) the switch uses
before sending an authentication request for a client
that failed authentication. (Default: 60 seconds)
Syntax: aaa port-access web-based <port-list > [reauth-period <0 - 9999999>]
3-26

Table of Contents

Other manuals for HP ProCurve 6120G/XG

Related product manuals