Removal and replacement procedures 26
2.
Close and lock the bezel.
3. Power on the server.
Removing the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Power down the server (on page 23).
2. Unlock the front bezel.
3. Remove the access panel ("Removing the access panel" on page 24).
CAUTION: Do not detach the cable that connects the battery pack to the cache module.
Detaching the cable causes any unsaved data in the cache module to be lost.
To Next Page
Loading...
