HP ProLiant ML110 G7 Maintenance And Service Guide

Specifications 92
Rated input frequency
50 Hz to 60 Hz
Rated input current
5.5 A at 100 VAC
2.6 A at 200 VAC
Rated input power
526 W at 100V AC input
505 W at 200V AC input
BTUs per hour
1794 at 100V AC input
1725 at 200V AC input
Power supply output
Rated steady-state power
460 W at 100V to 120V AC input
460 W at 200V to 240V AC input
Maximum peak power
460 W at 100V to 120V AC input
460 W at 200V to 240V AC input
• ATX 350W Power Supply
Specification Value
Input requirements
Rated input voltage
100V to 240V
Rated input frequency
50Hz to 60Hz
Rated input current
6A at 100VAC
3A at 200VAC
Efficiency
No less than 70% at 100% load
No less than 70% at 50% load
No less than 70% at 20% load
Power supply output
Rated output power
350W
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/).

HP ProLiant ML110 G7 Specifications

General

Product Type	Server
Form Factor	Tower
Processor Sockets	1
Chipset	Intel C202
Memory Type	DDR3 UDIMM
Maximum Memory	16 GB
Memory Slots	4
Processor	Intel Xeon E3-1200 series
Storage	SAS or SATA
Drive Bays	4 LFF or 8 SFF
Hard Drives	Optional
Optical Drive	Optional
Network Controller	HP NC112i Gigabit Ethernet Adapter (1 port)
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Storage Controller	HP Dynamic Smart Array B120i