HP ProLiant ML110 G7 Maintenance And Service Guide

Server component identification 80
Item Description Status
1
System health LED Green = Normal
Amber = System degraded
Red = System critical
2
NIC 1 link/activity LED Green = Network link
Flashing green = Network link and activity
Off = No link to network (If the power is off, view the rear panel NIC
LEDs for status.)
3
Drive activity LED Flashing green = Drive active
Off = No drive activity
4
System power button/LED Green = System on
Amber = System in standby, but power is still applied
Off = Power cord not attached or power supply failed
5
Power status LED Green = System on
Amber = System in standby, but power is still applied
Off = Power cord not attached or power supply failed
6
NIC 2 link/activity LED Green = Network link
Flashing green = Network link and activity
Off = No link to network (If the power is off, view the rear panel NIC
LEDs for status.)
7
UID button/LED Blue = Activated
Flashing blue = System being remotely managed
Off = Deactivated
8
Optical drive activity LED Flashing green = Drive active
Off = No drive activity
Rear panel components
Item Description
1
Kensington lock notch
2
Power supply connector
3
PCIe slot cover retainer latch

HP ProLiant ML110 G7 Specifications

General

Product Type	Server
Form Factor	Tower
Processor Sockets	1
Chipset	Intel C202
Memory Type	DDR3 UDIMM
Maximum Memory	16 GB
Memory Slots	4
Processor	Intel Xeon E3-1200 series
Storage	SAS or SATA
Drive Bays	4 LFF or 8 SFF
Hard Drives	Optional
Optical Drive	Optional
Network Controller	HP NC112i Gigabit Ethernet Adapter (1 port)
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Storage Controller	HP Dynamic Smart Array B120i