EasyManua.ls Logo

HP ProLiant ML30 Gen9

HP ProLiant ML30 Gen9
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Environmental specifications
Specification Value
Temperature range*
Operating 10° C to 35° C (50° F to 95° F)
Nonoperating -30° C to 60° C (-22° F to 140° F)
Relative humidity (noncondensing)
Operating, maximum wet bulb temperature of 28°C
(82.4°F)
10% to 90%
Nonoperating, maximum wet bulb temperature of
38.7°C (101.7°F)
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1.0° per 304.8 m (1.8°F per 1000 ft)
to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
Server specifications
Specification Value
Height 36.83 cm (14.50 in)
Depth 47.50 cm (18.70 in)
Width 17.50 cm (6.89 in)
Weight (full load, approximate values)
Four-bay LFF non-hot-plug drive model 13.1 kg (28.82 lb)
Four-bay LFF hot-plug drive model 13.6 kg (29.92 lb)
Eight-bay SFF hot-plug drive model 12.4 kg (27.28 lb)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
HPE 350W non-hot-plug power supply (E-star 1.0)
HPE 350W non-hot-plug power supply (E-star 2.0)
HPE 460 W CS Gold hot-plug power supply (92% efficiency)
This power input module is only supported when the two-bay redundant power supply assembly option is
installed.
CAUTION:
Check the system and power supply input ratings before powering up the server.
For detailed power supply specifications, see th QuickSpecs on the Hewlett Packard Enterprise website.
Specifications 103

Table of Contents

Other manuals for HP ProLiant ML30 Gen9

Related product manuals