9. Install the Smart Storage Battery, then connect the battery cable to the Smart Storage Battery connector
on the system board.
10. Install a front PCI fan.
11. Install the air baffle.
12. Install the access panel.
13. Install the bezel.
14. Return the server to an upright position.
15. Connect the power cord to the power source and the server.
16. Power up the server.
Installing a drive enablement option
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Each drive enablement option allows adding an additional SATA LFF drive to the server.
50 Installing a drive enablement option
To Next Page
Loading...
