10. Close the PCIe slot cover retainer.
11. Connect one end of the SATA cables to the enablement board and connect the other end to the SATA
connectors on the system board.
Port 1 connects to SATA 5 and port 2 connects to SATA 6.
12. Install the air baffle.
13. Install the access panel.
14. Install the bezel.
15. Return the server to an upright position.
16. Connect the power cord to the power source and the server.
17. Power up the server.
Installing a four-bay LFF hot-plug drive cage option
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Installing a four-bay LFF hot-plug drive cage option 57
To Next Page
Loading...
