• Eight-bay SFF hot-plug drive configuration
For RPS cable routing to a slim optical disk drive or a drive enablement option, see "Storage cabling."
15. Install the air baffle.
16. Install the access panel.
17. Install the bezel.
18. Return the server to an upright position.
19. Connect the power cord to the power source and the server.
20. Power up the server.
Drive options
The server supports up to four non-hot-plug LFF drives in the default configuration.
The embedded storage controller supports SATA drives only. To support SAS drives, install an HPE Host Bus
Adapter or an HPE Smart Array Controller.
The default drive cage may be replaced with an optional four-bay LFF hot-plug drive cage to support up to
four hot-plug LFF drives.
Drive options 39
To Next Page
Loading...
