• Redundant power supply configuration
11. Install a front PCI fan.
12. Install the air baffle.
13. Install the access panel.
14. Install the bezel.
15. Return the server to an upright position.
16. Connect the power cord to the power source and the server.
17. Power up the server.
Installing an M.2 SSD enablement option
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Procedure
1. Power down the server.
2. Disconnect the power cord from the power source and the server.
Installing an M.2 SSD enablement option 55
To Next Page
Loading...
