3. Remove the bezel.
4. Place the server on its side with the access panel facing up.
5. Remove the access panel.
6. Remove the air baffle.
7. Install the SSD module onto the M.2 SSD snablement board.
a. Insert the SSD module into the SSD slot at a 45 degree angle, then gently press the module down
against the M.2 SSD enablement board.
b. Secure the SSD module to the M.2 SSD enablement board with a screw.
c. Repeat the process if you are installing a second SSD module.
8. Open the PCIe slot cover retainer and remove the slot cover.
9. Install the M.2 SSD enablement board with SSD modules installed into PCIe slot 1 or 4.
56 Hardware options installation
To Next Page
Loading...
