HP ProLiant ML30 Gen9 - Memory Options and Specifications; Memory and Processor Information; DIMM Specifications

6. Remove the air baffle.
7. Install the device adapter on the system board.
8. Install the air baffle.
9. Install the access panel.
10. Install the bezel.
11. Return the server to an upright position.
12. Connect the power cord to the power source and the server.
13. Power up the server.
Memory options
Memory and processor information
The memory subsystem in this server supports UDIMMs only.
The following processors are optimized for single-rank and dual-rank PC4-2133 (DDR4-2133) UDIMMs
operating at up to 2133 MT/s:
• Intel Xeon E3-1200 v5 processors
• 3.30-GHz Intel Pentium G4400 processor and 3.50-GHz Intel Pentium G4500 processor
• 3.7-GHz Intel Core i3-6100 processor and 3.80-GHz Intel Core i3-6300 processor
The following processors are optimized for single-rank and dual-rank PC4-2400T (DDR4-2400) UDIMMs
operating at up to 2400 MT/s:
• Intel Xeon E3-1200 v6 processors
• 3.50-GHz Intel Pentium G4560 processor and 3.60-GHz Intel Pentium G4600 processor
• 3.90-GHz Intel Core i3-7100 processor and 4.00-GHz Intel Core i3-7300 processor
For the latest memory configuration information, see the product QuickSpecs on the Hewlett Packard
Enterprise website.
DIMM specifications
Intel Xeon E3-1200 v5 processor, 3.30-GHz Intel Pentium G4400 processor, 3.50-GHz Intel Pentium G4500
processor, 3.70-GHz Intel Core I3-6100 processor, 3.80-GHz Intel Core i3-6300 processor:
Memory options 63