10. Connect all drive cables.
11. Install the air baffle.
12. Install the access panel.
13. Install the bezel.
14. Connect the power cord to the power source and the server.
15. Power up the server.
Installing a hot-plug drive
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
42 Installing a hot-plug drive
To Next Page
Loading...
