Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes. Depending on the server model, your server may not support all of the tools and solutions in this
section.
Software or configuration utility Server mode
HP iLO Online and Offline
Active Health System Online and Offline
Integrated Management Log Online and Offline
Intelligent Provisioning Offline
HP Insight Diagnostics Online and Offline
HP Insight Remote Support software Online
HP Insight Online Online
Erase Utility Offline
Scripting Toolkit for Windows and Linux Online
Service Pack for ProLiant Online and Offline
Smart Update Manager Online and Offline
UEFI System Utilities Offline
HP ROM-Based Setup Utility Offline
Array Configuration Utility Online and Offline
HP Smart Storage Administrator Online and Offline
Option ROM Configuration for Arrays Offline
ROMPaq utility Offline
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
HPE iLO
iLO is a remote server management processor embedded on the system boards of HPE ProLiant and
Synergy servers. iLO enables the monitoring and controlling of servers from remote locations. HPE iLO
management is a powerful tool that provides multiple ways to configure, update, monitor, and repair servers
remotely. iLO (Standard) comes preconfigured on HPE servers without an additional cost or license.
Features that enhance server administrator productivity are licensed. For more information, see the iLO
documentation on the Hewlett Packard Enterprise website.
Software and configuration utilities 85
To Next Page
Loading...
