Procedure
1. Remove the bezel.
2. Remove the drive blank.
3. Prepare the drive.
4. Install the drive.
5. Determine the status of the drive LEDs.
To configure arrays, see the HPE Smart Storage Administrator User Guide.
Drive cable options
Use these drive cable options to support a Host Bus Adapter or a Smart Array Controller.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Installing a Host Bus Adapter Mini-SAS cable option
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Drive cable options 43
To Next Page
Loading...
