HP ProLiant ML350 Generation 4p - POST Problems Flowchart

122 HP ProLiant ML350 Generation 4p Server User Guide
POST Problems Flowchart
Symptoms:
•
•
•
•
•
Server does not complete POST
NOTE: The server has completed POST when the system attempts to
access the boot device.
Server completes POST with errors
Possible Problems:
Improperly seated or faulty internal component
Faulty KVM device
Faulty video device
Item Refer to
1 "POST Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website (http://www.hp.com/support
).
2 "Video Problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support
).
3 KVM or RILOE documentation or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP web (http://www.hp.com/support
)site.
4 "Loose Connections" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website (http://www.hp.com/support
).
5 Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
6 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)