EasyManua.ls Logo

HP ProLiant ML350 Generation 4p - Server Fault Indications Flowchart

HP ProLiant ML350 Generation 4p
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
128 HP ProLiant ML350 Generation 4p Server User Guide
Server Fault Indications Flowchart
Symptoms:
Server boots, but a fault event is reported by Insight Management Agents (on
page 103
)
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer to
1 "Management Agents (on page 103)"
2 • "Integrated Management Log (on page 106)"
"Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support
).
3 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
4 System Management Homepage at https://localhost:2381
(https://localhost:2381
)
5 "Power-On Problems ("Power-On Problems Flowchart" on page
119
)" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(http://www.hp.com/support
).

Table of Contents

Other manuals for HP ProLiant ML350 Generation 4p

Related product manuals