HP ProLiant ML350 Generation 4p User Manual

54 HP ProLiant ML350 Generation 4p Server User Guide
For more information, refer to "Server Software and Configuration Utilities (on
page 93
)" in this guide.
Hard Drive Options
Removing a Hard Drive Blank (on page 54)
SCSI Hard Drive Guidelines (on page 55
)
Installing Hot-Plug SCSI Hard Drives (on page 55
)
Installing a SATA or SAS Drive ("Installing a SATA or SAS Hard Drive" on
page 56
)
Removing a Hard Drive Blank
To remove a hard drive blank, push the lever to release the blank and pull out.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
NOTE: Depending on model purchased, the server may look slightly
different than shown.

HP ProLiant ML350 Generation 4p Specifications

General

Processor Socket	Socket 604
Chipset	Intel E7520
Form Factor	Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Processor	Intel Xeon
Memory	PC2-3200 DDR2 SDRAM
Memory Slots	8
Storage	SAS or SATA (depending on configuration)
Drive Bays	Up to 8 hot-plug drive bays
Network	Embedded NC7782 PCI-X Gigabit Server Adapter
Power Supply	Redundant power supply optional
Expansion Slots	6 total: 2 PCI-Express, 2 PCI-X