HP UPS Management Module web interface 52
The following example is for a 3 phase individual or parallel UPS.
Click the UPS tabs to view detailed information for each of the sub units in the parallel system. The
parallel system can contain up to six sub units.
Enter the system name and contact information using the System Information tab (on page 63) on the
Network Management screen.
Click Refresh to refresh the screen, or click Help to view online help.
Parameters menu
Click Parameters in the left navigation frame to display the Parameters screen. This screen displays the
available UPS parameter values. A status icon next to each parameter indicates the current state of the
parameter (Normal, Warning, or Critical).
To Next Page
Loading...
