HP UPS User Manual

HP UPS Management Module Service Menu 84
• Press the Enter key to refresh the screen.
• The management module resets automatically to allow configuration changes to take effect.
Service Menu
This menu only appears when accessing the management module using a terminal emulation program.
Option number Submenu Description
1 Module Configuration
Opens the HP UPS Management Module
Configuration Utility (on page 84)
2 UPS Pass-through
Bypasses the management module and
allows direct communication with the UPS
3 Exit
Exits the Service menu and resets the
management module
HP UPS Management Module Configuration Utility
Option number Submenu Description
1 UPS Monitor Displays UPS status information
2 Network Configuration
Enables network configuration for the
management module
3 System Configuration
Enables you to set the date, time, and
daylight saving time parameters
4 User Accounts
Enables you select an entry to set up and
configure user accounts
s
Save New Changes and
Restart
Saves changes and resets the management
module
r
Restore Configuration to
Manufacturer Settings
Restores parameters to default settings
UPS Monitor submenu
Option number Submenu Description
1 UPS Alarms Displays active UPS alarms
2 UPS Meters
Displays UPS input and output parameter
data
3 Battery
Displays battery data, battery status, and the
Battery submenu
4 Power Protection Displays the Power Protection submenu
0 Previous Menu Returns to the previous menu

HP UPS Specifications

General

Brand	HP
Model	UPS
Category	Power Supply
Language	English