HP UPS Management Module Service Menu 87
Option number Submenu Description
2 Read Community String
Enables you to enter or change the Read
community string of the SNMP manager
3 Write Community String
Enables you to enter or change the Write
community string of the SNMP manager
4 Access Privileges
Enables you to enter or change access
privileges of the SNMP manager
5
Enable/Disable SNMP
Manager
Enables you to enable or disable the SNMP
manager
0 Previous Menu Returns to the previous menu
SNMP Traps submenu
Option number Submenu Description
1 Trap Receiver IP Address
Enables you to enter or change the IP
address of a server that should receive SNMP
traps
2 Trap Community String
Enables you to enter or change the
community strings of a server that should
receive SNMP traps
3 Enable/Disable Trap Enables or disables an SNMP traps receiver
0 Previous Menu Returns to the previous menu
Emails submenu
Option number Submenu Description
1 Change SMTP Settings
Enables you to enter or change SMTP settings
in the SMTP Settings submenu (on page 87)
2 Edit An Entry
Enables you to edit an email recipient entry
on the Email Recipient submenu (on page 88)
0 Previous Menu Returns to the previous menu
SMTP Settings submenu
Option number Submenu Description
1 SMTP Server
Enables you to enter or change the mail
server IP address
2 Sender Email
Enables you to enter or change the email
address that messages are marked as being
sent from
0 Previous Menu Returns to the previous menu
To Next Page
Loading...
