HP V1905 Series - Reboot; Restore

121
Description
Use the quit command to exit the system.
Example
# Exit the system.
<Command-Line> quit
User interface Aux0/0 is available
Please press ENTER.
reboot
Syntax
reboot
View
User view
Parameter
None
Description
Use the reboot command to restart the switch.
Example
# Restart the switch.
<Command-Line> reboot
This will reboot device. Continue? [Y/N]
restore
Syntax
restore default
View
User view
Parameter
None
Description
Use the restore command to reset the switch to factory defaults.
Example
# Reset the switch to factory defaults.
<Command-Line> restore default
This will restore the default configuration in the FLASH memory
Are you sure?[Y/N]