18
Configuring the Switch
Configuring System Access
Network administrators can define user name, password, and access level for users using the System
Access Interface. The Multi-Session Web feature is enabled on switch and allows 10 users to be created
and access the switch concurrently. Access levels provide read or read/write permissions to users for
configuring the switch. Login information is managed in the local database. A unique password is required
for each user. Two access levels exist on the Web Interface:
Management access level: Provides the user with read/write access rights. There is always one
management level user configured for the switch.
Monitor access level: Provides the user with read-only system access rights.
This section contains the following topics:
Defining System Access
Modifying System Access
Removing System Access
Viewing System Access Settings
CAUTION:
To ensure that unauthorized users do not access the Web interface, HP recommends that you set an admin
password when you first configure the switch.
Defining System Access
The System Access Setup Page allows network administrators to define users, passwords, and access levels
for users using the System Access Interface.
Click Administration System Access Setup. The System Access Setup Page opens.
Figure 54 System Access Setup Page
To Next Page
Loading...
Need help?
General
