HP V1905 Series User Manual

94
Table 106 Broadcast Storm Setup Page item description
Item Descri
p
tion
Broadcast Mode
Defines whether forwarding broadcast packet type is enabled on the interface. The
possible field values are:
 Disabled: Disables broadcast control on the selected port. This is the default.
 Broadcast: Enables broadcast control on the selected port.
 Broadcast&Multicast: Enables broadcast and multicast control on the selected
port.
Broadcast Rate Threshold
Defines the maximum rate (kilobits per second) at which broadcast-only or
broadcast and multicast packets are forwarded. The default value is 3500
Viewing Broadcast Storm Control
The Broadcast Storm Summary Page displays the current broadcast storm control parameters for all ports.
Click Device  Broadcast Storm  Summary. The Broadcast Storm Summary Page opens.
Figure 135 Broadcast Storm Summary Page
The Broadcast Storm Summary Page contains the following fields:
Table 107 Radius Client Setup Page item description
Item Descri
p
tion
Broadcast Mode Displays the broadcast storm control mode.
Broadcast Rate Threshold Displays the broadcast storm threshold.
Managing System Information
This section contains information for configuring general system information, and includes the following:
 Viewing Basic Settings
 Configuring System Name

HP V1905 Series Specifications

General

Model	HP V1905 Series
VLAN Support	No
QoS	No
Management	Unmanaged
Jumbo Frame Support	No
Type	Unmanaged
Ports	8, 16, 24, or 48 ports
Uplink Ports	Gigabit uplink ports
MAC Address Table Size	4K entries
Power Consumption	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing