HP V1905 Series User Manual

11
NOTE:
For most installations, HP recommends that you configure the switch IP information manually. This makes
management simpler and more reliable as it is not dependent on a DHCP server, and eliminates the risk
of the IP address changing.
You can use ip address command to configure the static IP for your switch through the Console Port (see “CLI
Reference Guide”).

HP V1905 Series Specifications

General

Model	HP V1905 Series
VLAN Support	No
QoS	No
Management	Unmanaged
Jumbo Frame Support	No
Type	Unmanaged
Ports	8, 16, 24, or 48 ports
Uplink Ports	Gigabit uplink ports
MAC Address Table Size	4K entries
Power Consumption	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing