EasyManua.ls Logo

HPE Apollo 4200 Gen10 Plus

HPE Apollo 4200 Gen10 Plus
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Standard operating supportStandard operating support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level up to
a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F).
For certain approved hardware configurations, the supported system inlet temperature range is extended:
5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F
per every 574 ft) above 900 m (2,953 ft) to a maximum of 3,050 m (10,000 ft).
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2,953 ft) to a maximum of 3,050 m (10,000 ft).
The approved hardware configurations for this system are listed on the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/ASHRAEhttp://www.hpe.com/servers/ASHRAE).
Mechanical specificationsMechanical specifications
SpecificationSpecification ValueValue
Height 87.50 mm (3.44 in)
Depth 837.90 mm (33.00 in)
Width 448.0 mm (17.63 in)
Weight (approximate values)
24-bay LFF drive models (12 LFF in drive cage 1 and 12 LFF in
drive cage 2)
Without the 4 LFF or 8 SFF drive cage 3 option, minimum 18.80 kg (41.45 lb)
Without the 4 LFF or 8 SFF drive cage 3 option, maximum 41.56 kg (91.64 lb)
With the 4 LFF or 8 SFF drive cage 3 option, minimum 20.21 kg (44.56 lb)
With the 4 LFF or 8 SFF drive cage 3 option, maximum 45.35 kg (100.00 lb)
Without the two-bay SFF drive cage 4 option, minimum 20.21 kg (44.56 lb)
Without the two-bay SFF drive cage 4 option, maximum 45.35 kg (100.00 lb)
With the two-bay SFF drive cage 4 option, minimum 20.86 kg (46.00 lb)
With the two-bay SFF drive cage 4 option, maximum 46.75 kg (103.08 lb)
Without the two-bay SFF drive cage 4 and two-bay SFF drive cage
5 options, minimum
20.21 kg (44.56 lb)
Without the two-bay SFF drive cage 4 and two-bay SFF drive cage
5 options, maximum
45.35 kg (100.00 lb)
With the two-bay SFF drive cage 4 and two-bay SFF drive cage 5
options, minimum
21.59 kg (47.61 lb)
With the two-bay SFF drive cage 4 and two-bay SFF drive cage 5
options, maximum
48.35 kg (106.61 lb)
48-bay SFF drive models (24 SFF in drive cage 1 and 24 SFF in
drive cage 2)
HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide 73

Table of Contents

Related product manuals