7. Disconnect the -48 V and return wires from the power supply.
To replace the component, reverse the removal procedure.
Removing and replacing the cable armRemoving and replacing the cable arm
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before
touching them.
CAUTION: CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.
IMPORTANT:IMPORTANT:
Screws included for this part are color-coded. Be sure to replace the color-coded screws in the same location from
To Next Page
Loading...
