Operations 25
2.
Extend the server on the rack rails until the server rail-release latches engage.
3. Remove the server from the rack.
Extend the server from the rack
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack.
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into the rack. The sliding rails could pinch your
fingers.
To extend the server from the rack:
1. Pull down the quick-release levers on each side of the server to release the server from the rack. If
necessary, loosen the rack screws.
2. Extend the server on the rack rails until the server rail-release latches engage.
To Next Page
Loading...
