Operations 32
4.
Install the processor memory drawer.
5. Install the access panel (on page 26).
6. Install the server into the rack ("Installing the server into the rack" on page 38).
7. Connect each power cord to the server.
8. Connect each power cord to the power source.
9. Power up the server ("Powering up the server" on page 24).
Remove the processor memory drawer cover
1. Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
("Processor memory drawer shipping screw locations" on page 30).
2. Remove the processor memory drawer (on page 31).
3. Remove the processor memory drawer cover.
Install the processor memory drawer cover
To Next Page
Loading...
