HPE ProLiant DL580 Gen9 - Page 55

Hardware options installation 55
9.
Install the DIMM.
CAUTION: When closing the memory cartridge cover, be sure the plastic fingers under the
cover do not catch on the top edge of the DIMMs.
10. Close the memory cartridge.
11. While holding the baffle door open, install the memory cartridge.
12. Install the processor memory drawer cover ("Remove the processor memory drawer cover" on page
32).
13. Install the processor memory drawer ("Remove the processor memory drawer cover" on page 32, on
page 31).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server ("Powering up the server" on page 24).