• The Remote Console feature is enabled on the Access Settings page.
• The Virtual Media feature is enabled on the Access Settings page.
Procedure
1. Click Remote Console & Media in the navigation tree.
The Launch tab displays the remote console launch options.
2. Start the .NET IRC or Java IRC.
3. Click the Virtual Drives menu, and then select Image File Removable Media (IMG) or Image File CD-ROM/DVD (ISO).
The remote console prompts you to select a disk image.
4. Enter the path or file name of the image file in the File name text box.
You can also browse to the image file location, and then click Open.
The virtual drive activity LED will show virtual drive activity.
Using a virtual drive to install an OS and provide a required driver
You can use the remote console virtual drive feature to install an operating system. During the installation, you might be
prompted to provide access to a required driver, such as a storage controller driver.
Prerequisites
• Remote Console privilege
• The Remote Console feature is enabled on the Access Settings page.
• The Virtual Media feature is enabled on the Access Settings page.
• A license that supports this feature is installed. For information about the available license types and the features they
support, see the licensing documentation at the following website:
http://www.hpe.com/support/ilo-docs.
• The operating system ISO file is available on the client you will use to run the remote console.
• If you will install an operating system on an NVMe drive, the Boot Mode is set to Unified Extensible Firmware Interface
(UEFI).
• iLO Remote Console privilege
• The Remote Console feature is enabled on the iLO Access Settings page.
• An iLO license that supports using the remote console is installed. For information about the available license types and
the features they support, see the licensing documentation at the following website:
http://www.hpe.com/support/ilo-
docs.
• The operating system ISO file is available on the client you will use to run the remote console.
• If you will install an operating system on an NVMe drive, the Boot Mode is set to Unified Extensible Firmware Interface
(UEFI).
Procedure
1. Download and extract the required driver.
116 Using HPE iLO 5
To Next Page
Loading...
