HPE STOREONCE 5500

HPE StoreOnce Configuration Wizard
Purpose of the HPE StoreOnce Configuration Wizard
When deploying or upgrading to StoreOnce version 3.16.0 or later, the first time a user logs in to the
StoreOnce GUI, the user must select whether to configure Remote Support or No Support. Once this
selection is made, the HPE StoreOnce Configuration Wizard is automatically displayed.
The wizard guides you through the system's first-time installation of:
• Time and date
• User management
• License management
• Optional hardware
• Network configuration
• Storage
• Email configuration
Using the StoreOnce Configuration Wizard
If you do not want to follow the steps in the wizard, click Discard.
Procedure
1. Click Proceed to display the recommended configuration steps and sequence.
2. Click the link to the first step.
3. Make the required changes and click Finish to return to the wizard.
4. Continue to work through the tasks shown in the wizard. Refer to either the online help or the
appropriate chapter in this guide for more information about individual tasks. Check the Advanced box
to display additional, optional configuration tasks.
5. You may leave the configuration wizard at any time by clicking Exit. The system gives you the option
of creating StoreOnce backup targets. Either click on one of the links or click OK to finish.
6. To redisplay the wizard, select Configuration Wizard from the Navigator.
7. The wizard displays every time you log on. To prevent this happening, check the Do not show at next
login box.
HPE StoreOnce Configuration Wizard 33