HPE STOREONCE 5500

Creating user accounts and changing default
passwords
StoreOnce user accounts
Two roles define the permissions associated with a user; they are called admin and user. Two default
user accounts, one for each role, are created automatically when the system is installed
• Admin account: This account has permissions associated with an administrator who is responsible for
configuring and managing the HPE StoreOnce System. The default User Name and Password for this
account is Admin, admin.
• User account: This account has operator permissions only and will not be able to carry out any system
configuration; the default User Name and Password for this account is Operator, operator.
Immediately after installation, the administrator should change the default passwords and create
additional user accounts, assigning permissions, as appropriate.
Adding a local user
Procedure
1. Log on as an Administrator and select User Management from the Device Configuration menu.
2. Click Add User.
3. Select a User Type of Local.
Creating user accounts and changing default passwords 41