HPE XP7 - Page 204

Column names Description
Pool Status Displays the current status of the Smart pool or the ThP pool.
Following are the statuses and their descriptions:
• Normal: Indicates that the Smart or the ThP pool is functioning
properly.
• Over threshold: Indicates that the Smart or the ThP pool has
crossed the threshold capacity that you set on the P9500/XP7 disk
array.
• Blocked: Indicates that the Smart or the ThP pool has reached
100% utilization and has gone into the suspended state. There is
no more storage space left.
• Failure: Indicates that the Smart or the ThP pool is in a failed state.
The VVols performance data, the respective RAID Groups, and the
pool LDEVs utilization data is not displayed for such pools.
IOPS Displays the sum of the random and sequential read and write I/Os on
the individual Smart pool or the ThP pool.
MBPS Displays the sum of the random and sequential reads and writes in
MB/s on the individual Smart pool or a ThP pool.
Backend Tracks Displays the total Backend tracks associated with the Smart pool or
the ThP pool. It is an aggregate of all the Backend transfers due to
I/Os occurring on every VVol in the Smart pool or the ThP pool.
Max Read Response Time Displays the maximum of Max Read Response time of the Pool
Virtual Volumes.
Max Write Response Time Displays the maximum of Max Write Response time of the Pool Virtual
Volumes.
Average Read Response Time Displays the average of Average Read Response time of the Pool
Virtual Volumes.
Average Write Response Time Displays the average of Average Write Response time of the Pool
Virtual Volumes.
Table Continued
204 Summary view