HPE XP7 - Page 205

Column names Description
Tier Relocation Progress Rate Displays the rate at which the relocation is performed at the end of
each monitoring cycle. The value displayed is in the range of 0 to 100.
• Displays 0, if no relocation is performed.
• Displays 100, if the relocation is complete.
• Displays any value between 0 to 100, if the relocation is in
progress or incomplete.
NOTE: The Tier Relocation Progress Rate is applicable only for
Smart pools.
Total Physical FMD Gen2 Capacity (GB) Displays the maximum value of physical usable FMD Gen2 capacity
in a pool.
Used Physical FMD Gen2 Capacity
(GB)
Displays FMD Gen2 physical capacity used in the entire pool.
Physical FMD Gen2 Usage Rate (%) Displays the usage rate (%) for FMD Gen2 physical capacity in a
pool.
Total Logical FMD Gen2 Capacity (GB) Displays the maximum value of logical usable FMD Gen2 capacity in
a pool.
Used Logical FMD Gen2 Capacity (GB) Displays FMD Gen2 logical capacity used in the entire pool.
Saving (GB) Displays the savings (GBs) through compression.
Saving (%) Displays the savings (%) through compression.
Compression Ratio Displays the ratio of compression.
View Monitoring Information
Click a pool in the pool information pane to see the monitoring details of that pool.
Table 16: Smart Pool monitoring information screen elements
Screen elements Description
Last available start time Displays last available monitoring cycle start time with PADB.
Last available end time Displays last available monitoring cycle end time with PADB.
Relocation Type Displays type of tier relocation. For example, Auto or Manual.
Monitoring Mode Displays mode of monitoring. For example, Period or
Continuous.
Table Continued
Summary view 205