Hsun HS700UTV - Adjusting the Front Shock Absorbers; Adjusting the Rear Shock Absorbers

3-32
Locknut (rod end)
40 Nm (4.0 m · kg, 29 ft · lb)
ADJUSTING THE FRONT SHOCK ABSORBERS
WARNING:
Always adjust both shock absorber spring preload
to the same setting. Uneven adjustment can cause
poor handling and loss of stability.
Note:
The spring preload of the shock absorbers can be
adjusted to suit the operator’s preference, weight,
and the operating conditions.
1. Adjust:
• spring preload Turn the adjuster to increase o
r
①
decrease the spring preload.
Standard position: 2
Minimum (Soft) position: 1
Maximum (Hard) position: 5
ADJUSTING THE REAR SHOCK ABSORBERS
WARNING:
A
lways adjust both shock absorber spring preload
to the same setting. Uneven adjustment can cause
poor handling and loss of stability.
NOTE:
The spring preload of the shock absorbers can be
adjusted to suit the operator’s preference, weight,
and the operating conditions.
1. Adjust:
• spring preload Turn the adjuster to increase o
r
①
decrease the spring preload.