EasyManua.ls Logo

Hsun HS700UTV - Checking the Wheels

Default Icon
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-34
Adjust.
NOTE:
• The tire pressure gauge is included as standard
equipment.
• If dust or the like is stuck to this gauge, it will not
provide the correct readings. Therefore, take two
measurements of the tire’s pressure and use the
second reading.
WARNING:
Uneven or improper tire pressure may adversely
affect the handling of this vehicle and may cause
loss of control.
• Maintain proper tire pressures.
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front tires
and equal in both rear tires.
2. Check:
tire surfaces
Wear/damage
a
Replace.
Tire wear limit a
Front and rear: 3.0 mm (0.12 in)
WARNING:
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification, replace the
tire immediately.
CHECKING THE WHEELS
1. Check:
wheels Damage/bends Replace.
Note:
Always balance the wheel when a tire or wheel has
been changed or replaced.

Table of Contents