the lighting and ignition systems and could
possibly cause a fire.
4. Install:
• battery case cover
5. Close the hood.
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
• turn the adjuster in or out.①
Turning in Headlight beam raised.
Turning out Headlight beam lowered.
CHANGING THE HEADLIGHT BULB
Remove:
• Lift the hood up.
• headlight bulb holder cover ①
• headlight bulb holder (with bulb) ①
• bulb
Note:
Remove the defective bulb by unhooking the
headlight bulb holder tabs②
WARNING:
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot. Do
not touch the bulb until it cools down.
2. Install:
• bulb new
Secure the new bulb with the headlight bulb holder.
Note:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the transparency o
the glass, life of the bulb, and luminous flux will be
adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.