3-44
• headlight bulb holder (with bulb)
• headlight bulb holder cover
• Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• cargo bed panel ①
• tail/brake light bulb holder (with bulb) ①
• bulb
Note:
Turn the bulb holder counterclockwise and remove
the defective bulb.
WARNING:
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot. Do
not touch the bulb until it cools down.
2. Install:
• bulb new
Secure the new bulb with the tail/brake light bulb
holder.
Note:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the transparency o
the glass, life of the bulb, and luminous flux will be
adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• tail/brake light bulb holder (with bulb)
• cargo bed panel
To Next Page
Loading...