Huawei AP4050DN-E User Manual

Figure 5-111 Installed OT terminal
l Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals can be
installed on the post and that the electrical connecting pieces have a large contact area.
Two OT terminals can be installed using any of these methods:
– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in Figure 5-112.
– Cross the two terminals, as shown in Figure 5-113.
Figure 5-112 Bending the upper OT terminal at a 45- or 90-degree angle
Figure 5-113 Crossing two terminals
AP4050DN-E
Hardware Installation and Maintenance Guide
5 Appendix
Issue 05 (2018-02-02) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
97

Huawei AP4050DN-E Specifications

General

Brand	Huawei
Model	AP4050DN-E
Category	Wireless Access Point
Language	English