Huawei AR150 series - Binding a DDNS Policy to an Interface

Step 2 Run:
ddns policy policy-name
A DDNS policy is created and the DDNS policy view is displayed.
Step 3 Run:
url request-url
The Uniform Resource Location (URL) in DDNS update requests is specified.
After a DDNS policy is created, enter the URL and specify a DDNS server in the URL. The
processes for the AR150/200 to request DDNS updates from different DDNS servers are
different; therefore, the URL configuration of DDNS servers is different.
l When the AR150/200 uses HTTP to communicate with the DDNS server provided by the
vendor at www.3322.org, the URL in a DDNS update request is:
http://username:password@members.3322.org/dyndns/
update'system=dyndns&hostname=<h>&ip=<a>
l When the AR150/200 uses TCP to communicate with the DDNS server provided by the
vendor at www.oray.cn, the URL in a DDNS update request is:
oray://username:password@phddnsdev.oray.net
Step 4 Run:
interval interval-time
The interval for sending DDNS update requests is set.
After the interval for sending DDNS update requests is set in the configured DDNS policy, the
AR150/200 sends DDNS update requests at intervals. By default, the interval for sending DDNS
update requests is 3600s.
----End
4.5.4 Binding a DDNS Policy to an Interface
You can bind a DDNS policy to an interface to update the mapping between the specified fully
qualified domain name (FQDN) and an IP address.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ddns apply policy policy-name fqdn domain-name
The DDNS policy is bound to the interface.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 4 DNS Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
92