Huawei AR150 series - Setting the MSS of TCP Packets on an Interface; Checking the Configuration

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
tcp window window-size
The packet receive or transmit buffer size of a connection-oriented socket is set.
The value of window-size ranges from 1 to 32, in K bytes. The default value is 8K bytes.
----End
7.5.5 Setting the MSS of TCP Packets on an Interface
After the maximum segment size (MSS) of TCP packets on an interface is set, the size of received
or sent TCP packets is limited within the MSS so that network performance is improved.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
tcp adjust-mss value
The MSS of TCP packets is set on the interface.
The MSS of TCP packets on an interface is an integer that ranges from 128 to 2048, in bytes.
----End
7.5.6 Checking the Configuration
After configuring TCP attributes, you can view the configuration.
Procedure
l Run the display tcp status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ipv4-
address ] [ local-port local-port-number ] [ remote-ip ipv4-address ] [ remote-port
remote-port-number ] ] command to check the TCP connection status.
l Run the display tcp statistics command to check the TCP traffic statistics.
----End
Example
# Run the display tcp status command to view the TCP connection status.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 7 IP Performance Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
186