Huawei AR150 series - Configuring an Interface to Forward Broadcast Packets; Configuring an Outbound Interface to Fragment IP Packets

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
discard srr
The interface is configured to discard IP packets with source route options.
----End
7.3.4 Configuring an Interface to Forward Broadcast Packets
By configuring an interface to forward broadcast packets, you can improve network
performance.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
ip forward-broadcast [ acl acl-number ]
The interface is configured to forward broadcast packets.
By default, an interface does not forward broadcast packets.
----End
7.3.5 Configuring an Outbound Interface to Fragment IP Packets
You can configure an outbound interface to fragment IP packets.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 7 IP Performance Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
177