Ethernet1/0/0 current state : UP 
IPv6 protocol current state : UP
IPv6 is enabled, link-local address is FE80::200:1FF:FE04:5D00 [TENTATIVE]
  Global unicast address(es):
2001::1, subnet is 2001::/64 [TENTATIVE]
  Joined group address(es):
    FF02::1:FF00:1
    FF02::1:FF04:5D00
    FF02::2
    FF02::1
  MTU is 1500 bytes
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  ND retransmit interval is 1000 milliseconds
  Hosts use stateless autoconfig for addresses
Run the display ipv6 interface command. If the configured IPv6 address and interface status
are displayed, it means that the configuration succeeds.
<Huawei> display ipv6 interface brief
*down: administratively down
(l): loopback
(s): spoofing
Interface                    Physical              Protocol
Ethernet2/0/0         up                    up
[IPv6 Address] 2030::101:101
Ethernet2/0/1         up                    up
[IPv6 Address] 2001::1
LoopBack0                    up                    up(s)
[IPv6 Address] Unassigned
Run the display ipv6 statistics command. If the statistics on IPv6 packets is displayed, it means
that the configuration succeeds.
<Huawei> display ipv6 statistics
IPv6 Protocol:
  Sent packets:                                                                 
    Total              : 3630                                                   
    Local sent out     : 3630       Forwarded          : 0                      
    Raw packets        : 0          Discarded          : 0                      
    Fragmented         : 0          Fragments          : 0                      
    Fragments failed   : 0          Multicast          : 0                      
 
  Received packets:                                                             
    Total              : 3630       Local host         : 3630                   
    Hop count exceeded : 0          Header error       : 0                      
    Too big            : 0          Routing failed     : 0                      
    Address error      : 0          Protocol error     : 0                      
    Truncated          : 0          Option error       : 0                      
    Fragments          : 0          Reassembled        : 0                      
    Reassembly timeout : 0          Multicast          : 0                      
 
3.4 Configuring IPv6 Neighbor Discovery
IPv6 neighbor discovery (ND) is a packet transmission process to identify the relationship
between neighboring nodes. The Neighbor Discovery Protocol (NDP) replaces the Address
Resolution Protocol (ARP), ICMP Router Discovery messages, and ICMP Redirect messages,
and introduces neighbor reachability detection.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 3 Basic IPv6 Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59