EasyManua.ls Logo

Huawei AR150 series - Configuring a DHCP;BOOTP Client; Establishing the Configuration Task

Huawei AR150 series
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l Run the display dhcp server group group-name command to check the configurations of
the DHCP server group.
----End
Example
Run the display dhcp relay interface interface-type interface-number command to view the
DHCP server group bound to VLANIF 100 and information about the DHCP group servers.
<Huawei> display dhcp relay interface vlanif 100
** Vlanif100 DHCP Relay Configuration **
DHCP server group name : group1
DHCP server IP [0] :10.10.10.10
DHCP server IP [1] :10.10.10.11
DHCP server IP [2] :10.10.10.12
Run the display dhcp relay statistics command to view the statistics on the DHCP relay agent.
<Huawei> display dhcp relay statistics
The statistics of DHCP RELAY:
DHCP packets received from clients : 0
DHCP DISCOVER packets received : 0
DHCP REQUEST packets received : 0
DHCP RELEASE packets received : 0
DHCP INFORM packets received : 0
DHCP DECLINE packets received : 0
DHCP packets sent to clients : 0
Unicast packets sent to clients : 0
Broadcast packets sent to clients : 0
DHCP packets received from servers : 0
DHCP OFFER packets received : 0
DHCP ACK packets received : 0
DHCP NAK packets received : 0
DHCP packets sent to servers : 0
DHCP Bad packets received : 0
Run the display dhcp server group group-name command to view the configurations of DHCP
server group 1.
<Huawei> display dhcp server group group1
Group-name : group1
Group-type : --
(0) Server-IP : 100.10.10.1
(1) Server-IP : 100.10.10.2
Gateway : --
VPN instance : --
1 DHCP server group(s) in total
6.6 Configuring a DHCP/BOOTP Client
After a Layer 3 interface of the AR150/200 is specified to function as a DHCP/BOOTP client,
the interface can dynamically obtain an IP address and other configurations from the DHCP
server by using the DHCP/BOOTP protocol.
6.6.1 Establishing the Configuration Task
Before configuring a DHCP/BOOTP client, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 6 DHCP Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
149

Table of Contents

Other manuals for Huawei AR150 series

Related product manuals