Huawei AR150 series - Configuring Routed Proxy ARP; Establishing the Configuration Task

Procedure
l Run the display arp [ all ] command to check all ARP entries, including static ARP entries
and dynamic ARP entries.
l Run the display arp interface interface-type interface-number [ vid vlan-id [ cevid cevlan-
id ] ] command to check ARP entries on the specified interface.
l Run the display arp network net-number net-mask [ dynamic | static ] command to check
ARP entries on the specified network segment.
l Run the display arp dynamic command to check dynamic ARP entries.
l Run the display arp statistics { all | interface interface-type interface-number } command
to check statistics on ARP entries on the AR150/200 or the specified interface.
----End
Example
# Run the display arp interface command, and you can view ARP entries on Eth1/0/0.
<Huawei> display arp interface ethernet 1/0/0
IP ADDRESS MAC ADDRESS EXPIRE(M) TYPE INTERFACE VPN-INSTANCE
VLAN/CEVLAN PVC
------------------------------------------------------------------------------
192.168.1.11 0000-0a41-0201 I - Eth1/0/0 r1
192.168.1.1 0000-0a41-0200 15 D-6 Eth1/0/0 r1
------------------------------------------------------------------------------
Total:2 Dynamic:1 Static:0 Interface:1
# Display all the dynamic ARP entries.
<Huawei> display arp dynamic
IP ADDRESS MAC ADDRESS EXPIRE(M) TYPE INTERFACE VPN-INSTANCE
VLAN/CEVLAN PVC
------------------------------------------------------------------------------
10.137.217.210 00e0-fc01-0203 I - Eth1/0/0
10.137.216.1 0025-9e38-a09e 20 D-0 Eth1/0/0
10.137.217.208 00e0-fc01-0205 16 D-0 Eth1/0/0
10.2.2.1 00e0-fc99-9999 I - Eth-Trunk0
10.6.3.34 00e0-fc01-0204 I - Eth2/0/0.1
192.168.20.1 00e0-fc99-9999 I - Vlanif100
10.0.0.1 00e0-fc99-9999 I - Vlanif200
------------------------------------------------------------------------------
Total:7 Dynamic:2 Static:0 Interface:5
1.5 Configuring Routed Proxy ARP
Routed proxy ARP implements communication between devices on the same network segment
but on different physical networks.
1.5.1 Establishing the Configuration Task
Before configuring routed proxy ARP, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
will help you complete the configuration task quickly and accurately.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 1 ARP Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10